433MHz 220V 2 Channel Wireless Remote Control Switch Module Gate Up Down Controller Motor Reverse Learning Code with AK-DJZFZ+AK-TF03 Transmitter

Application: The remote control elevator controller is a wireless control device widely used in garage door control, projection screen control, remote control curtain, powder wall machine and other fields. It has the advantages of easy installation, simple use, safety and reliability. System composition: 1. Three-button remote control (function: rising - stop - drop) 2. Remote lift controller Description: Working frequency: 433MHZ Operating voltage of remote controller: 12V23A (battery) Controller operating voltage: AC 220V Controller rated power: 1000W Code method: Press and hold the learning button for two seconds, the indicator light is off, press any button on the remote control, the indicator light flashes, and the learning is successful. Instructions: 1. Be careful to choose the correct working voltage, otherwise it will damage the device and even be life-threatening. 2. The load power cannot exceed the contact capacity, and the correct approach should be less than 70% of the contact capacity. Note: 1. There is high voltage inside the machine. Please do not disassemble it. Please install it under the guidance of professionals to avoid personal injury. 2. If the remote control distance is found to be shorter, please replace the remote control battery (size 12V 23A) 3. Please disconnect the input power during installation. Package included: 1 x 433 MHz AC 220V 2 Channel Remote Switch Wireless Module 2 x Remote Control with battery