4 in 1 LCD Soil Tester Plant Flower pH Moisture Temperature Light Analyzer, 501 Original

Battery Powered 4 in 1 LCD Electronic Digital Display Soil Tester pH Moisture Temperature Light Analyzer Test Meter for Garden Plant FlowerDescription: The 4 in 1 electronic digital display soil analyzer is the latest soil quick test device, which mainly tests the pH, moisture, temperature, and plant light intensity of the soil.Use a 9V carbon battery, easy to operate, the probe length is 200mm/7.87in.The measured parameters are displayed on the LCD.With low battery indication and automatic power-off function.Save time and energy, and high efficiency.It is suitable for flower and grass planting and landscaping.Feature: 1. Measure the light intensity of the current environmentLOW-, LOW, LOW+, NOR-, NOR, NOR+, HGH-, HGH, HGH+2. Measure the moisture content of the soilDRY+, DRY, NOR, WET, WET+3. Measure the temperature of the soilTemperature measurement range: -9 - +50℃ (16 - 122℉), (accuracy: 1℃/1℉)4. Measure the pH of the soilPH measurement range: 3.5-9.05. Large screen LCD user interface6. Temperature metric and English conversion function7. Power-saving, 5 minutes without any operation, automatic shutdown8. Easy to carrySpecification: Material: ABS + electronic componentsWorking temperature: +5℃ - +40℃Size: 340x63x36mm/13.39x2.48x1.42inProbe length: 200mm/7.87inWeight: 200gPower supply: 9V battery(not included)Instruction: Please install the battery before use and remove the probe protective cover.1. Light measurementA. Press the ON button to turn on the instrumentB. Aim at the highest point light source light sensor windowC. The current light intensity will be displayed on the LCDTip: Please do not block the light or create shadows on the light sensor2. PH range measurementA. Push the (pH/℃) button on the back to the pH positionB. Insert the probe vertically into the soil, it needs to be tested as soon as possibleC. Press the (ON) button to start measurementD. The tested pH value will be displayed on the LCDE. Measure several times to get the exact value neededTip: 1. Insert the probe vertically, at the edge of the stem of the plant in the middle2. Please gently push into the soil to avoid damage to the probe3. If the measured soil is too dry or fertile to measure the accurate pH value, the user can sprinkle some water and measure again after half an hour3. Moisture measurementA. Push the (pH/℃) button on the back to the ℃ positionB. Insert it into the soil as vertically as possibleC. Press the ON button to start measurementD. The tested soil moisture value will be displayed on the LCDE. Measure several times to get the exact value needed4. Temperature measurementA. While measuring the humidity, the soil temperature value will be displayed on the LCD simultaneouslyB. Press the (℃/℉ OFF) button to set the temperature display to ℃ or ℉Tip: If the user does not insert the probe into the soil, the display shows the accurate ambient temperature of the external space.Note:1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!2. Please allow 1-3cm measuring deviation due to manual measurement.1 X Soil Tester