4 Channel Electric Cloning Gate Garage Door Auto Key 433Mhz Cloning Gate For Garage Door Remote Control Switch

4 Channel Electric Cloning Gate Garage Door Auto Key 433Mhz Cloning Gate For Garage Door Remote Control Switch
sku: 1227265489
ACCORDING TO OUR RECORDS THIS PRODUCT IS NOT AVAILABLE NOW
$10.88
Shipping from: United States
   Description
Description: Cloning chip types: 2260(PT2260 SC2260 LX2260 HX2260); 2262 (PT2262 SC2262 LX2262 HS2262 HX2262) PT2264 PT2240(LX2240) 1527( EV1527 HS1527 HX1527 ) FP527 CS5211 SMC918 SMC926 AX5026 AX5326-3 AX5326-4 HT600 HT680 HT6207 HT6010 HT6012 HT6013 HT6014 HT12D HT46F49E PIC16F629 PIC16F630 and so on. Different chip manufacturers have different prefixes chip model as long as the digital portion of the chip can be the same model. Note: We usually do not recommend copying a rolling code chip because there are many uncertainties when copying a rolling code chip. When copying a rolling code chip remote control it is not possible to determine whether the original remote control chip is an encryption chip. Therefore we do not recommend copying the rolling code remote control. Use steps: 1. Clear code: two fingers at the same time hold the unlock key and lock key; the LED light rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go) and then use the loose finger to quickly click three times on the loose button until the LED light flashes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off it means clear code is successful(four keys all empty); if after you press any button of the remote control the light is still on it indicates that the original code has not been cleared successfully. You need to re-clear and only successfully clearing the code can cloning be successful. You can repeatedly clear and clone the code. 2. Copy: left hand taking the original remote control right hand taking our cloned remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds the LED light will flash quickly 2 times; after one second the indicator light keeps flashing and let go of your fingers; and then press the key after successful study the light keeps on which means that the first key code on original remote control has been copied to the other remote control; the same method can be used in turn on the second key the third key... If the copy is successful the remote control function is the same as the original matching remote control. 3. Restore: When you accidentally clear the copy of the remote control code you can simultaneously press the copy of the remote control of the bottom two keys LED lights will flash quickly let go after pressing any key light long this Indicating that the code for the remote control is restored. Before using our copy remote control please be sure to remove the existing code from the remote control. 4. How to deal with the situation where some of the keys can control the rest cannot control? You can use clear and restore operation the specific operation is as follows: (1) first clear code;

Customers also viewed