3Pcs Beitian BS-280 232 GPS Receiver Module 1PPS Timing With Flash + GPS Antenna

Description 232 level output 9600 1HZ output standard NMEA 0183 protocol output ParameterDescriptionChip characteristicsChipU blox U7Receiving modeGPS QZSS WAAS SBAS EGNOS MSASFrequencyGPSL1 SBAS L1Channel56 search channels SensitivityTrack 162dBmRecapture 160dBmCold start 148dBm PrecisionHorizontal accuracy2 0 m CEP 2D RMS SBAS assist open space Speed accuracy0 1m s 95 SA off Time accuracy1us Start TimeCold start29sWarm start25sHot Start1sOutput DataBaud rate4800bps 921600bps default 9600bpsOutput levelTTL or RS232 default RS 232 levelOutput protocolDefault NMEA 0183 protocolStandard GNSS1Hz 10Hz default 1Hz Work limitHeight50 000m maximumSpeed515m s maximumGravity acceleration4g maximumPower consumptionVoltageDC 3 6V 5 5V typical 5 0VCurrentNormal 45mA 5 0V Physical parameterSize28mm 28mm 8mmWeight11 5 gramsLine length2mConnector1 25 pitch 6pin socketSurroundingsOperating temperature 40 C 85 Cstorage temperature 40C 85CIndicator lightTX lightPower on blue light flashes to indicate that there is data output PPS lightThe light is not lit when it is not positioned After 3D positioning it starts to blink The pins of the module are 1 PPS there is a second pulse output after positioning the pulse period is 1s and the high level lasts for 100ms which is used for system synchronization 2 GND ground 3 TX the data output of the module 4 RX the data input of the module 5 VCC 3 6 5 5V recommended 5 0V 6 BOOT please hang out during normal work