3G SIM5320E GSM/GPRS 850/900/1800/1900MHz/ WCDMA/900/2100MHZ HSDPA SMS With 3M Active Antenna Shield For Arduino Expansion Board

Introduction: The SIM5320E module operates at GSM/GPRS 850/900/1800/1900MHz/ WCDMA/900/2100MHZ, supports HSDPA, and enables voice, SMS and data transmission with low power consumption. With a size of 30*30*2.9 mm, the SIM5320E can be used in a variety of compact product designs. General features: GPRS multi-slot class 12 EDGE multi-slot class 12 Output power - WCDMA 850/1900: 0.25W - WCDMA 900/2100: 0.25W - GSM850/GSM900: 2W - DCS1800/PCS1900: 1W Control Via AT Commands Supply voltage range: 3.4~ 4.2V Operation temperature: -30 to +80 Extended operation temperature: -40 to +85 Dimension: 30 * 30 * 2.9 mm Weight: 5.6g Other features: USB Driver for Microsoft Windows 2000/XP/Vista/7/8 USB Driver for Windows CE/Mobile USB Driver for Linux /Android Firmware update via USB MMS TCP/IP MUX protocol over UART FTP/FTPS/HTTP/HTTPS/SMTP/DNS FOTA Interfaces: USB2.0 UART SIM card SPI I2C Keypad Constant current sink GPIO RTC ADC MIc/Receiver ** PCM * Support embedded Script Language: LUA Script Language Embedded AT * Specifications for GPS/Location: CELL assistant Location (No GPS) A-GPS: MS-Based, MS-Assisted Stand-alone GPS QUALCOMM XTRA GPS mode Specifications for Data transfer: HSDPA - Max. 3.6Mbps(DL) WCDMA - Max. 384Kbps(DL),Max.384Kbps(UL) EDGE Class: - Max. 236.8Kbps(DL),Max.118Kbps(UL) GPRS - Max. 85.6Kbps(DL),Max.42.8Kbps(UL) CSD - GSM data rate 14.4Kbps - WCDMA data rate 57.6Kbps - WCDMA 64kbps CSD for Video call Multi-PDP connect application Specifications for SMS: Point to point MO and MT Text and PDU mode SIM530E shield hardware introduction: The power interface supports 5-9V voltage input, the power adapter current can provide no less than 2A; the onboard 3.7V lithium battery interface The communication interface is a TTL level serial port (D2-TXD D3-RXD) which is fully compatible with Arduino The SIM5320E switch (D7-ON/OFF) can be controlled by level 3 red LED lights onboard to indicate power, status and network conditions Onboard lithium battery circuit for powering the SIM5320E RTC Onboard active GPS antenna SMA interface Onboard 3G antenna SMA interface Onboard Arduino expands the female interface and fully supports Arduino Support four-segment headphone jack (type I) Supports updating the SIM5320E firmware and AT command debugging via the onboard MICRO USB The on-board TVS tube, SIM card protection IC, and two 470UF tantalum capacitors make the development board stable SIM5320E shield software introduction: It communicates with external systems through a TTL level serial port. By default, it can communicate directly with the Arduino system without level matching. The communication interface (command) is an AT command, that is, the control module realizes the function completely by the AT command, for example, the control module dials the phone to use ATD*******; (* is the other party's phone number). We will provide a complete set of AT instructions. More details and manual>>>>>>>>http://files.banggood.com/2018/08/SIM5320E-ARDUINO-V1.0-EN.zip