35mm Hinge Jig Kit Aluminum Alloy Wood Working Hole Puncher Double Clamps

Features: Three-Bearing Drill Sleeve: Upper middle and lower 3-bearing drill sleeve the total height of the drill sleeve reaches 2cm the higher the height the smaller the drill bit swings and the more accurate the opening is Double Clamps: One-button press firm clamping can clamp the board thickness 15-25mm the opening depth 10-15mm the rubber pressure head does not damage the paint surface Adjustment Function: It has the function of adjusting the hole position and margin which can be adjusted by loosening the screw and the adjustable range of the margin is 3-7mm Edge-Sealing Lower Groove Design: After the door panel is edge-sealed it can also operate normally without affecting the slotting accuracy (the edge-sealing groove depth is 2mm) Side Hole Drilling Method: Method 1: Use the tool s own hole position to make holes and the fixed hole distance is 48mm (the electric drill on the drilling bit should be removed first when drilling); Method 2: Directly use the holes on the chain for easy positioning Fast no size constraints (due to the different sizes of the hinge side holes on the market this method is recommended) Specifications: Type: Hinge Jig Kit Material: Aluminum Alloy Rubber Color: As Picture Hinge Jig Panel(W x H): About 75x118mm/2.95x4.65inch Hole Puncher Dia: About 35mm/1.38inch Drill Bit Dia: About 2mm/0.01inch Tool maintenance: When the tool is in use or idle add some lubricating oil into the bearing to reduce tool wear and rust.(The rust on the bearing and the tool holder will cause the tool head to not move flexibly) Package Included: 1pc x Hinge Jig 1pc x Hole Puncher 1pc x Drill Bit 1pc x Hex Wrench 1pc x Bearing 1pc x Limit Ring 2pcs x Wrench Note: 1. Due to the light and screen difference the item s color may be slightly different from the pictures. 2. Please allow 0.5-2 cm differences due to manual measurement.