315/433MHz Universal Wireless 4 Keys Door Gate Garage Copy Remote Control, 501 Original

315/433MHz Universal Wireless 4 Keys Door Gate Copy Remote Control Cloning Duplicator Remote Controller for Home Auto GarageSpecification: Name: 4 Keys Copy Remote ControlMaterial: ABSSize: 65*40*12mm/2.56*1.57*0.4inRated voltage: 12VRated current: 10mAInstallation mode: WirelessCorresponding frequency: 315/433MHzModulation mode: ASK (amplitude modulation)Wireless transmitting distance: 50-100m (open) Scope of application: garage door, alarm, automatic door, rolling shutter door, etc.Copied chip types: 2260 (e.g. PT2260, SC2260, LX2260,HX2260); 2262, (e.g. PT2262, SC2262, LX2262,HS2262,HX2262, etc.), PT2264, PT2240 (LX2240), 1527 ( e.g. EV1527, HS1527, HX1527 ), FP527, CS5211, SMC918, SMC926, AX5026, AX5326-3, AX5326-4, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F629, PIC16F630, etc. Other chip models compatible with the above chips can also be copied.Use steps: 1. Clear code: press and hold the upper row two keys (A.B) at the same time, the indicator flash three times, release the B key, press the B key for three times in a row (hold down the A key) the indicator has been flashing, indicating that the code has been cleared successfully. 2. Copy: press and hold the button that needs to be copied, and the indicator light flashes three times until the indicator light flashes all the time, and the copy code is successful. 3. Restore: when you accidentally clear the code of the copy remote control, you can press the bottom two keys of the copy remote control at the same time. After the LED light flashes for three times, it will flash quickly, press any key again after release, and the light is on, which indicates that the code of the copy remote control has been restored. Before using our copy remote control, be sure to clear the existing code of the copy remote control. 4. How to copy some of the keys can not be controlled after the situation, the rest can be controlled, you can use the removal and recovery operation tips, the specific operations are as follows: (1) Clear the code first. (2) After the code has been cleared successfully, copy the buttons that were not successfully copied just now, and do not copy the buttons that have been successfully copied before. (3) Perform code clearing operation. (4) Perform a restore operation; at this time, the keys that were not successfully copied are overwritten by the newly copied code, while the original successfully copied code is retained. If there is still a button that has not been successfully copied after the second copy, you can clear the code again, copy the button that did not copy successfully again, and then clear the code and restore it again. Do this again and again until all the keys are successfully copied.Precaution: 1. The prerequisite for choosing the copy remote controller: the function of the original remote controller is normal, the remote control chip is the same or compatible, and the remote control frequency is the same. 2. the copy remote controller can only copy the fixed code, the learning code chip and the remote controller of part of the single-chip microcomputer (see the type of chip that can be copied in the description of the chip type that can be copied). 3. The two-way remote control, the rolling code remote control and the remote control of the encryption program of single-chip microcomputer can not be copied. Such as HCS200,HCS201,HCS300,HCS301 and so on. 4. Before copying the remote control, make sure that the existing code of the remote control has been cleared and check whether the code has been cleared successfully. Otherwise, replication cannot be made. 5. When copying, please make sure that your remote control has enough power, and the distance between the two remote controls is as close as possible. If the distance is too close, the switch can copy from different angles. When you press and hold the button of the original remote control, you need to emit the signal completely normally, and then press the button to copy the remote control to ensure that the function is completely copied.Note:1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!2. Please allow 1-2cm measuring deviation due to manual measurement.Package Content:1 X Copy Remote Control