30A Solar Charge Controller PWM Controllers 12V 24V Auto LCD LCD Display Dual USB 5V Output Solar Panel PV Regulator

1. Build-in industrial -controller. 2. Big LCD display all adjustable parameter. 3. Fully 4-stage PWM charge management. 4. Build-in short-circuit protection open-circuit protection reverse protection over-load protection. 5. Dual mosfet Reverse current protection low heat production. This is very practical type PWM solar controller it is small and light you can use 12V and 24V Lead acid Gel Sealed Flooded Batteries.It can fully meet your home Photovoltaic system(including home lighting system )requirements. Parameter: 30A Max Voc: 24V (12V) 48V (24V); Max Power: 360W (12V) 720W (24V) System Connection: 1. Connect the battery to the positive and negative of the charge regulator. 2. Connect the photovoltaic module to the positive and negative of the regulator. 3. Connect the user to the positive and negative side of the charge regulator. The reverse order applies when unloading Improper sequence order can damage the controller Safety instructions 1. Before the first installation please make sure the battery has enough voltage to enable the controller to recognize the battery type. 2. Battery cables should be as short as possible to minimize losses. 3. The regulator is only suitable for lead-acid batteries: OPEN GEL. It does not apply to NiMH Li-ion or other batteries. 4. The charge regulator is only suitable for regulating solar modules. Do not connect other charging sources to the charge regulator. Model Number:Solar charge controller Application:Charger Controller Application:Voltage Controller Application:Lighting Controller Float charge:13.7V(default adjustable) Discharge stop:10.7V(default adjustable) Discharge reconnect:12.6V(default adjustable) Battery Voltage:12V 24V Auto Work Max Power:780W (12V) 1560W (24V) color:Blue+black Material:plastic Package Contents: 1 x Solar Charge Controller