300W 30Mpa High Pressure Air Pump Fits Most Air Guns & Paintball HPA Tank

300bar Air Compressor 110V/12V Pump 4500PSI 30Mpa High Pressure Airgun Pump Specifications: Voltage: 110 V / 60 HZ Power: 300 W Power Supply: 12V Car Battery ( 30 + A ) Working pressure: 0-30 Mpa Maximum Pressure: 300bar / 4500psi / 30mpa Oil-water filter: Exist Cooling System: Two High-power Fans Oil or Water: Neither Need Shut Off: Manually Product size: 21.5 * 17.2 *13.2 cm Packing size: 35 * 30 * 25 cm Product weight: 5.2 KG Packing weight: 7 KG Applications: suitable for most air guns and paintball HPA tanks Filling speed: 0.5L 0 to 300bars needs 20 minutes around. 200-300bars needs 8 minutes around Description: This product is compact compact and portable temperature display high-pressure exhauster integrated design; Battery driven fast and fuel saving; The operating temperature of the machine is displayed and the temperature of the machine is monitored in real time; Built in cooling fan large area hollow shell effective heat dissipation; The fuselage is equipped with a high hardness plastic handle which is light and easy to carry; Easy to filter and maintain. Use Steps : 1 . Check the 110V AC voltage set on the converter 2 . Connect the power and air hose 3 . Turn on the cooling fan 4 . Tighten the bleed valve to the right 5 . Start the compressor NOTES : The inflation pressure should be less than30MPa. Do not over-inflate your air gun . The duty cycle is : continuous inflation for 25minutes and rest for 10 minutes If the temperature reachs 80 degrees please stop filling and keep the fan running to dissipate heat Tighten the bleed valve before inflation loosen it after filling completion to release the high-pressure air in the hose and then disconnect the air gun . Always turn on the cooling fan first and turn off last . Keep the cooling fan running until the compressor cools below 50C Packing list: 1 x high pressure air pump 1 x 110V to 12V External Power Adapter (The input voltage has been set to 110v and the portsare connected to wires . All left to do is simply inserting .) 1 x 12V car battery charger 1 x Oil water separator 1 x manual instructions