300Mbps Wireless-N Wifi Repeater 2.4G AP Router Signal Booster Amplifier Antenna WIFI Extender WiFi Repeater Router

Specifications: Model: RP102 Color: White LAN port: 1 port Type: Wireless Voltage: AC220 V Username:admin Password:admin SSID: Repeater-9F4C Maximum data rate: 300Mbps Default Access: http://myrepeater.net Default IP: 192.168.1.1 Size: Body:85*55*35MM/3.34*2.16*1.37inch Antenna:75MM/2.95inch Features: 1-. The WiFi Repeater is a combined wired/wireless network connection device designed specifically for small business, office, and home office networking requirements. 2-. It allows a wireless network to be expanded using multiple access points without the need for a wired backbone to link them. 3-. Improves wireless coverage in all WLAN networks 4-. Grid cooling: It adopts two-sided grid heat dissipation design, which can dissipate heat quickly even after long-term use, and maintain a good condition of the equipment to provide a high-speed and stable online experience. 5-. Compound signal extension: Duplex villa, the first floor is large, the second floor signal is not good, after the signal is extended by multiple expanders, the signal coverage increases. 6-. Support 2.4GHz WLAN networks 7-. Maxmum WLAN security with WPA2, WPA and WEP(128/64) 8-. Software wizard for simple setup 9-. Feel free to access wireless network via your Tablet PC, Laptop, Smart Phone anywhere 10-. Easy to Install and Use - Small size and wall-mounted design make it easy to deploy and move with flexibility. 11-. Applicable to scenarios where wifi signals cannot be fully covered, such as houses, offices, warehouses, etc. 12.-One signal - no need to switch hotspots: When expanding, the router and the wireless signal of the router have the same name. When the Internet terminal moves, the connected wireless signal will automatically switch to the device with strong signal, and the network will not be disconnected during the switching process, so that you can enjoy high speed anywhere in the home. Online experience Note: 1. The WiFi name after repeater relay is required is the same as the original router name. 2. Due to the compatibility of the terminal device (such as mobile phone) system or the WiFi device optimization scheme of the terminal device system, there may be different situations. Please refer to the actual situation. 3. The situation that appears in 2, can not use a signal, it is recommended to modify the repeater wireless name Note: 1. Make sure the repeater is placed in a location where it can receive a strong signal from your desired wireless Internet connection. The repeater will not work without a signal that it can repeat 2. The wireless signal rate based on the IEEE 802.11b chipset standard, g, n used. Actual flow may vary. Network conditions and environmental factors reduce the actual flow. All specifications are subject to change without notice. 3. Please allow 0.5-1cm differences due to manual measurement. 4. Due to the light and screen difference, the item's color may be slightly different from the pictures. Packaged included: 1 x User Manual 1 x 300Mbps Wifi Repeater Range Extender.