30.5x30.5mm Holybro Kakute F7 V1.5 Flight Controller & 65A BL_32 Tekko32F3 Metal 4in1 ESC 4-6S Stack for RC Drone FPV Ra

Holybro Kakute F7 V1 5 Flight Controller65A BL 32 Tekko32F3 Metal 4in1 ESC 4 6S Stack Combo for RC Drone Specification Brand Name HolybroItem Name F7 Flight Controller65A 4 in 1 ESC StackKakute F7 V1 5 Flight Controller Manual Brand name HolybroItem name Kakute F7 V1 5MCU STM32F745 32 bit processorIMU MPU6000 SPI Barometer BMP280Current Sensor Approximately 130 amps maximum measurable valueUSB VCP Driver all UARTs usable simultaneously USB does not take up a UART 6 hardware UARTS UART1 2 3 4 6 7 All UARTS support hardware inversion SBUS SmartPort and other inverted protocols work on any UART without uninvert hack Supports serial receivers SBUS iBus Spektrum Crossfire only PPM and PWM receivers are not supported TF card for Blackbox loggingDimensions 35x41x7mm includes foam mounted gyro board in height Mounting Holes Standard 30 5mm square to center of holesWeight 8g Tekko32F3 Metal 4in1 ESC Manual Brand Name HolybroModel Tekko32F3 Metal F3 M4 Core MCU Runs BLHELI32 firmware the MCU works at 108MhzThe 4in1 has onboard analog current sensor and TLM function then no current reading over TLM Using metal case mosfet for better Heat dissipationSupports Lipo 4 6SExt cap needed for 6s 470uf 35v for 6s usage Size 42 x 42 mmMounting holes 30 530 5mmWeight 12g Notice The air flow is very import if you want to run this 4in1 in high current The input cable from lipo to 4in1 should be good soldered and at least 12AWG Features The 4in1 has on