3.2 Inch 8Pin 240*320 TFT LCD Screen SPI Serial Display Screen Module ILI9341 For Arduino

Description: Size: 3.2 inches Control chip: ILI9341 Resolution: 240*320 (RGB) Display area: 48.60 (W) *64.80 (H) Physical size: 56 (W) *89.40 (H) *4.65+/-0.15 (T) Interface type: 3 line serial port /4 line serial port Number of pins: 8Pin Display color: Full color Pixel size: 0.2025 (W) *0.2025 (H) Working temperature: -20 ~ 70 degrees PIN No. Symbol Description 1 GND Ground 2 VCC Power supply for LCD(2.8V-3.3V) 3 CLK This pin is used serial interface clock in 3-wire 9-bit / 4-wire 8-bit serial data interface. 4 MOSI Serial input signal. The data is applied on the rising edge of the SCL signal. 5 RES LCM Reset pin.Signal is active low. 6 DC Serves as a write signal and writes data at the rising edge. - 4-line system (D/CX): Serves as command or parameter select. 7 BLK Backlight switch pin. Low level turns off the backlight, other states turn on the backlight 8 MISO Serial output signal. The data is outputted on the falling edge of the SCL signal. If not used, open this pin Package Included: 1 x 3.2 Inch TFT LCD Screen