3-phase 380V 1.5KW 2HP VFD Inverter Frequency Converter for Motor Speed Control

Control modeSensorless vector control (SVC) Frequency (V/F) control Startup torque0.25 Hz/150% (SVC) Speed range1:200 (SVC) Speed stability accuracy±0.5% (SVC) Torque control accuracy±5% for 10 Hz above (SVC) Torque boostCustomized boost 0.1 % to 30.0 % V/F curveStraight-line V/F curve; Multi-point V/F curve; Square V/F curve; Complete V/F separation; Half V/F separation Ramp modeStraight-line ramp S-curve ramp Four separate acceleration/deceleration time settings in the range of 0s to 6500s. DC injection brakingDC injection braking frequency: 0 Hz to max. frequency DC injection braking active time: 0.0s to 36.0s. Current level of DC injection braking: 0% to . Jog runningFrequency range of jog running: 0.00 to 50.00 Hz Acceleration/Deceleration time of jog running:0.0s to 6500.0s Onboard multiple preset speedsThe system implements up to 16 speeds by using simple PLC function or by using digital input signals. Onboard PIDThe system implements the proportionalegral-derivative (PID) function in the closed-loop control. Automatic voltage regulation (AVR)The system maintains a constant output voltage automatically when the grid voltage changes through the permissible range. Overvoltage and overcurrent stall controlThe system limits the output current and voltage automatically during operation to prevent frequent or excessive trips. Torque limit and controlThe system limits the torque automatically to prevent frequent overcurrent tripping during operation. Individualized functionsPower dip ride-throughLoad feedbacks energy compensates for any voltage reduction allowing the drive to continue to operate for a short time during power dips. Overcurrent fast preventionThe function helps to avoid frequent overcurrent faults. Virtual I/OFive groups of virtual digital input/outputs (X /DO) support simple logic control. Timing controlTime range: 0.0 to 6500.0 minutes Dual-motor switchoverThe drive have two groups of motor parameters and can control up to two motors. Multiple field busesThe drive supports four field buses: Modbus-RTU; PROFIBUS-DP; CANlink; CANopen RUNCommand sourceAllows different methods of switching between command sources: Operating panel (keypad & display) Terminal I/O control Serial communication Main frequency reference setting channelSupports up to 10 frequency reference setting channels and allows different methods of switching between frequency reference setting channels: Digital setting Analog voltage reference Analog current reference Pulse reference Communication reference Auxiliary frequency reference setting channelSupports up to 10 auxiliary frequency sources and allows fine tuning of the auxiliary frequency and main & auxiliary calculation. Input terminalsStandard: Six digital input (X) terminals of which supports up to 100 kHz high-speed pulse inputs. Two analog input (AI) terminals of which supports only 0 to10 V input and the other supports 0 to 10 V and 4 to 20 mA current input. Operation temperature-10℃ to +50℃ If the ambient temperature is not in this range de-rate the drive according to section 1.5 De-rating. Storage temperature-20℃ to +60℃ HumidityLess than 95% RH non-condensing. VibrationLess than 5.9 m/s (0.6 g). Pollution degreePD2 Overvoltage categoryOVC III Specification Product Model: 9600-3T-00150M Input power: three-phase 380V Rated power: 1.5KW Rated current: 3.9A Adapter motor: 1.5KW 2HP Dimensions: W: 80mm H: 160mm D: 135mm Application: Mini Installation size and aperture: W1: 76mm H1: 150mm od: 5 (mm) Packing list: 1* VFD Inverter Frequency Converter 1*Instruction