3 Gears Heating Pad Easy Clean Portable Safety Pu Leather for Home Pets Supplies, Styleb, 501 Original

Specification:Features: Comfortable and safe, easy to cleanFunction: Regulate pet body temperature, stimulate appetite, promote pet metabolism and development.Shape: rectangleTypes of pets: such as lizards, snakes, turtles and other amphibians.Season: cold weatherSmart Devices: NoOther: Reptile heating pad, Reptile heating pad, Reptile heating pad, Reptile heating pad, Reptile heaterLine length: about 1 meterRated voltage: DC5V/2APower: 8.5WMaterial: PU leatherSize:About 22x15cm/8.66x5.90inch, About 33x18cm/12.99x7.08inch (optional)Illustrate:1. Take out the USB plug, connect it to the 2A jack of the power pack, turn on the power pack, and turn on the online temperature control switch to heat.2. The temperature will be adjusted every time you press the switch, the red light is high temperature, the orange light is medium temperature, and the green light is low temperature.3. When the heating is off, press the temperature control switch to turn off the light and stop the heating.4. When cleaning, gently brush the surface of the heating pad with a brush, etc., and use it after natural ventilation and drying. Do not use hot water or strong acid detergents.5. The switch cannot be cleaned, pulled or disassembled! If it is not used for a long time, please do not turn on the electric heater. arrivePrecautions for using heated leather:1. Do not use by people who can\\'t take care of themselves, babies or people who are not sensitive enough to heat.2. Do not scrape the hot cloth with a needle bayonet, and use it strictly when there is no one indoors.3. Do not use in wet environment, please dry before use.Instructions for using the three-position switch:1. After power-on, press the button for the first time to start, high temperature (red light on) outputs 100% voltage, then press medium temperature (orange light on) twice to output 85% voltage, low temperature (blue light on) output 70% voltage % voltage, press the first four times to shut down.2. In the power-on state, when you press and hold the key for 3 seconds for the first time to enter the 30-minute timer, the current temperature indicator flashesNote:Dimensional errors from manual measurements may be small.Color deviation may vary due to different monitor settings, please understandPackage Content:1 x Heating Pad