24/36V Single Wheel Hub Motor Electric System Driver Pulse Longboard Skateboard Controller Remote ESC Substitute

specification: Suitable for: Hub with Hall motor and hub without Hall motor Rated Voltage: 24V (6S) / 29V (7S) / 36V (10S) (optional) Drive Mode: Single system driver (pulse) Remote Control: 100 x 54 mm / 3.94''x 2.13'' Radiator: 106 x 86 mm / 4.17''x 3.39'' Control Panel: 83 x 62 mm / 3.27''x 2.44'' Controller: The control board and remote control are connected when the product is shipped. If you have not connected or replaced the remote control, please connect as follows How to connect to the remote control panel? 1. Connect the control board to the power supply. 2. Turn on the control board, wait 2 seconds, then press the switch on the control panel. The power indicator blinks. 3. Turn on the remote control, then use the small stick to press the counter button on the lower left of the remote control. 4. After the frequency connection is completed, the normal light of the remote control and the power indicator of the control board flash. connection succeeded. Note: Allow slight dimensional differences due to manual measurements. Product details may vary slightly due to different production batches. Due to the different displays and different lighting, the picture may not reflect the actual color of the item. Consider the actual size given in the list, as the image will usually zoom in to show details. Package Included: 1 Control Panel 1 X Radiator 1 X Remote Control (2-speed mode) 1 Battery Indicator (24V / 29V / 36V)