24/36V Single Motor Electric System Driver Noninductive Longboard Skateboard Controller Remote ESC Substitute

Description: Can be used as a spare parts. Protection: overvoltage, undervoltage, overtemperature, stall, speed control function. Single motor electric longboard skateboard control modula with remote can do as ESC do, would be more stable. Specification: For: Belt Motor Rated Voltage: 24V / 36V (optional) Drive Mode: Single System Driver (noninductive) Remote: 100 x 54 mm / 3.94'' x 2.13'' Heatsink: 106 x 86 mm / 4.17'' x 3.39'' Control Board: 83 x 62 mm / 3.27'' x 2.44'' How To Connect Remote & Control Board? 1. Connect the control board to power source. 2. Turn the control board power on, wait 2 seconds, then press and hold the switch for about 6 seconds, till the power indication light flickering, then loose the hold of the switch immediately. 3. Turn on the remote, then use a little stick to press the code synchronize switch on down left side of the remote. 4. Turn off the remote, wait 2 second to turn it on again. Wait till the remote's sinal light and the control board's power indicate light both flickering. Then connect sucess. Note: Please allow slight dimension difference due to manual measurement. Due to different producing batches, product details might be a little different. Due to different monitors and different light, the picture may not reflect the actual color of the item. Please consider the actual sizes given in the listing as the pictures are generally enlarged to show detail. Package Included: 1 X Control Board 1 X Heatsink 1 X Remote (3 speed mode) 1 X Battery Indicator (24V / 36V)