220V Single Channel Wireless Remote Control Switch Learning Code Lamp Controller LED Electric Light Remote Control Switc

Introduction This wireless remote control switch is designed with two working modes manual and remote control The buttons on the interface are either manual switch keys or learning keys for code matching with the remote control There are two adjustable working modes self locking and interlocking in the remote control working mode which can be switched through the learning button on the interface and can be matched with more than 10 wireless remote controllers in any combination In self locking mode learn the code matching with the same button on the remote control press the same button once to turn it on and press it again to turn it offIn interlock working mode it is to learn the code with two different keys on the remote control press one key to turn on press the other key to turn off Technical Parameters Weight 0 05KGWorking voltage AC85 250VLoad ≦1000WSpecification 55 51 25mm including shell Working frequency 315MHz 433MHz optional Working mode self locking interlocking switching by learning method Self locking learning code matching method First after the wireless remote control switch is powered on connect an electrical appliance to manually test whether the remote control switch is normally powered on Then after long pressing the learning button for about 3 seconds the learning indicator on the remote control switch interface will light up Release your hand and immediately press any button on the remote control twice The learning indicator