220V AC 500W Soldering Iron Heavy Duty Chise w/ Copper Point Carft Munufacturing

Precautions for use: 1. Before using the soldering iron, check whether the voltage matches 2. Soldering iron should be kept dry, is strictly prohibited in the wet use 3. The new soldering iron in the initial use, due to electric heating elements may be produce heat a little smoke, as a normal phenomenon, will soon disappear 4. Fever after a few times to remove the tip, remove the oxide layer, avoid long time oxide layer blockage couldn't take out the welding head 5. Do not replace the parts under power 6. In order to improve the life of the tip, please use environmentally friendly, low acid, halogen-free flux products 7. When the tin does not stick, using fine sand skin polishing welding Tsui, and then infiltrated by flux on the tin; when no tin, the tip control about 250 temperature in the best 8. The use of voltage 220V 10% AC, in the use of soldering iron before, should distinguish between power and grounding wire whether connect right. Specification: Material: Carbon non-metallic, high insulation handle, long life ceramic heating core Chisel Point tip: Copper Input voltage: AC220 V Power: 500 W Temperature range: 450-600 Whole Size:185 x 155 x 45mm Chisel Point tip: 105 x 30 x20mm Cable length: 1.1m Package includes: 1 x 500W Soldering iron heavy duty chisel (According to the delivery countries distribute adapter.) Details pictures: