220V 30A Wireless Remote Control Switch Receiver Transmitter 315/433MHz

The wireless signal can pass through walls, floors and doors. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance. It applies to lights, auto door, window, motor controller, water pump and more.
Output Way
Momentary. Toggle .Latched Adjusted by Jumper
Code Type
Learning code Add Controller by the Learning Button on the receiver
Output State:
It is adjusted by the Jumper on the Receiver Board.
A: Momentary: Put the Jumper on 1 Pin or take away the Pin
B: Toggle: Put the Jumper on “1&2”
C: Latched: Put the Jumper on "2&3"
Momentary: Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF,
Toggle: Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF,
Latched: Press transmitter button A, the receiver relay A is ON, Press transmitter button B, the relay A OFF.
Learning Code
Input AC220V for the Receiver ,the receiver power indicator ON, Press the Learning Button until the Led indicator OFF. Then press transmitter, the Led indicator flash for 3 times, it mean learning successfully.
Clearing Code
Press the Learning Button and hold, the LED indicator from OFF to ON, it means clearing is successfully.
Specifications
Working Voltage AC220V
Max Load 30A Relay, Resistive load≤25A, Inductive load≤20A
Channel 1CH
Working Frequency 315MHz/433.92MHz Optional
Receiver Sensitivity : -105Db
Working Temperature -10'C - +60'C
PCB Size 70 x 50 x 18 mm
Package Contents 1 x Receiver, 1 x Transmitter