200km/h DC9-32V 85mm GPS Speedometer Speed Meter Gauge Waterproof For Auto Car Motor ATV Boat

Specification Working voltage DC9 32VWorking current 100mA 24V Working temperature 30 75℃Storage temperature 40 85℃Operation 1 Press the Set button less than 1 second to change the back light color Color in sequence Red Default Green Blue White Yellow Kelly Orange Purple Auto ModeRemarks When users select the AUTO MODE the backlight will be off for around 2 seconds and switch automatically as above sequence per minute 2 Hold the MODE button for 3 seconds for Switch TRIP01 or TRIP02 or COG to display TRIP01 Default total mileage for one working cycle data will not be recorded when power off TRIP02 total mileage for one working cycle data will not be recorded when power off but users could hold the set button for 3 5 seconds to clear COG00 azimuth instantly indicating data will not be recorded Remarks the unit of trip total mileage and outta unit of dial are the same 3 Malfunction Characters COGTRIP will be flickering when there is not any positive GPS signal When the GPS speedometer was connected it will search any positive GPS signal in 300 seconds And it will account automatically second by second displaying at the trip part Explanation E01 There is not any positive GPS signal although it is on E02 Firstly the speedometer works well but suddenly lost signal The gauges will display the same speed as previous if the GPS signal back again in 30 seconds or speedometer will return to be zero E03 The speedometer could not receive an