200A Brushless Governor Helicopter ESC with Slow Start Function 2-7S

Description of ESC setting optionsHow to enter option setting mode 1 Connect the motor ESC and receiver to each other but be careful not to connect the battery and the power cord of the ESC 2 Turn on the remote control and set the throttle stick to the highest position full throttle Note The throttle position of most Futabas remotes is reversed 3 Connect the power cord of the ESC and the battery power on the ESC control the motor and make some rhythmic beeps How to operate option settings After entering the option setting mode the motor will emit some specific regular beeps a short rising tone followed by one or more short beeps These sounds are the prompts for the current options of the ESC Each prompt will be repeated 3 times and then change to the next main option You can input commands throttle sticks before the end of the sound The main option menu is cyclic if you miss it you can wait for the prompt to arrive again it just takes some time The meaning of the main option prompt sound is as follows BeepMeaning of the tone�7�8 Short music 1 short chantMain option 1 Battery type and number of batteries�7�8 Short music 2 short chantsMain option 2 Throttle related settings�7�8 Short music 3 short chantsMain option 3 Brake standard fixed wing version ESC Operation mode electrical direct version ESC �7�8 Short music 4 short chantsMain option four direction and protection mode�7�8 Short music 5 short chants