2.8 Inch LCD Display NanoVNA VNA HF VHF UHF UV Network Analyzer Antenna Analyzer + Battery(White)

Simple and practical PC control software you can export (snp) files for various radio design and simulation software through PC software. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the easurement frequency up to 900MHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50K-300MHz frequency range of the si5351 direct output provides 70dB dynamic. The extended 300M-600MHz band provides 50dB of dynamics and the 600M-900M band is 40dB of dynamics. This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 400mAh battery which can be used offline for 2 hours. For longer measurement please connect external supply or contact me to make a larger battery version. The TX/RX can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22 you need to manually replace the transceiver port wiring. Specification: Product Name: Vector Network Analyzer Measurement frequency: 50KHz ~ 300MHz (50KHz -900MHz enable extended firmware) RF output: -13dbm (maximum -9dbm) Frequency accuracy: Less than 0.5ppm Measurement range: 70dB (50kHz-300MHz) 50dB (300M-600MHz) 40dB (600M-900MHz) enable extended firmware) Port SWR: Less than 1.1 Display: 2.8 inch TFT (320 x240) USB interface: USB type-C Communication mode: CDC (serial) : USB 5V 120mA built-in 500mAh battery maximum charging current 0.8A Number of calibration points: 101 (fixed) Number of scanning points: 101 (fixed) Display Tracking: 4 Marking: 4 Setting Save: 5 Measuring S parameters voltage standing wave ratio phase delay chart. Material: Plastic + Metal colour: White Package Contents: 1 x NanoVNA host (with 500mAh battery) 1 x USB Type-C data cable 2 x 30mm SMA male to male RG174 RF cable 1 x SMA simple calibration kit 1 x SMA female to female connector