2 Stroke Gas Powered Sweeper Backpack Broom Sweeper Gasoline Engine 52cc 2.3HP

52cc 2 Stroke 2.3HP Gas Power Sweeper Handheld Broom Sweeper Gasoline Engine Description Are you still bothered by the leaves falling in your yard? Are you still looking for a machine that can quickly clear snow that has been piled up on the road for a long time? Then this sweeper will be a good choice for you. With its high-powered two-stroke engine it will quickly and efficiently finish the sweeping job and save you a lot of time. Details Nylon Brush Head: The brush head of this sweeper is made of high-quality nylon which is strong and durable. The brush heads are dense and tight making close contact with the ground and leaving every inch of the lawn clean and tidy. Curved Baffle: The baffle effectively prevents the operator from being hurt by sand dust small stones and branches during the work to provide local protection so it can be used with greater confidence. Assistive Handle: In addition to the main control lever it also has an auxiliary handle that allows you to operate it with two hands for greater stability and ease. Comfortable Backpack: A comfortable backpack not only makes it easy to carry but also frees your hands. Application It can be used to sweep boulevards driveways lawns pavements golf courses football pitches tennis courts and other areas with artificial grass. Specification Color: Red and Black Brush Material: Nylon Brush Head Type: Rolling Bar Brush Assembly Required: Yes Starting Method: Hand Pull Start Carrying Style: Backpack Drive Type: Petrol-powered Automatic Clutch Engine Type: 2-stroke Gasoline Engine Air-cooled Engine Power: 1.7 kW / 2.3 hp Brush Head Rotation Speed: 200rmp Displacement: 52 cc Fuel: Gasoline-oil Mixture (25: 1) Tank Capacity: 1L/0.26gal Nylon Brush Head Width: 52cm/20.4in Brush Head Diameter: 23cm/9in Total Length: 180cm/70.87in Curved Baffle Size: 60*35cm/23.62*13.7in Backpack Section Height: 40cm/15.75in Packing Size: 78*49*37cm/30.7*19.29*14.56in Gross Weight: 18.5kg/40.78lbs Net Weight: 18kg/23.68lbs Package Included 1x Mainframe 1x Operating Lever 1x Drive Rod 1x Drive Flex Shaft 1x Carry Handle (Aluminum Tube Stabilizer) 1x Tool Kit 1x Proportioning Pot 1x Funnel 1x Goggles 1x English Instruction Manual Notes 1. Clean the air filter sponge once at 20 working hours. 2. Open the hood after 50 working hours to remove dust from the cylinders and other parts of the engine. 3. Remove the spark plugs and clean out the carbon deposits at 200 working hours and replace them if necessary. 4. Empty the carburetor pump bubble of fuel when not in use for a long time. 5. Open the connection plate after 200 hours of operation and check the clutch for wear and tear and determine whether it needs to be replaced according to the operating conditions. 6. Fill the grease once at 50 working hours. 7. Check if the screws are loose in all parts of the drive shaft. 8. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement and make sure you do not mind before ordering.