2 Pack Heavy Duty 3/8 -1/2 Ratchet Load Chain Binder Truck Flatbed Tie Down

Description This is a professional industrial load-securing device that provides a strong fastening for your heavy equipment or large machines. It is made from robust steel with a plastic sprayed finish for strength and rust resistance. The hooks on both sides will provide safe non-sliding operation and can be connected to chains for a wider range of uses. It will be the ideal choice for you! Details Extended Lever: The extended lever (13.89in) provides extra leverage so you can control it quickly and effortlessly to get the right tension or release. Forward and Reverse Switch: A forward and reverse switch at the ratchet mechanism controls the tightening and loosening work of the chain binder which is very practical and convenient. Application It is suitable for securing heavy loads on trailers trailers and flatbeds with transport chains and can be matched with your 3/8 inch to 1/2 inch chain suitable for most industrial applications such as factories buildings warehouses garages docks port transportation bridge construction lifting handling. Specifications Material: 45# Steel Color: Red Hook Rating: G70 Process: Heat-treated Plastic Spraying Compatible Chain Size: 3/8 -1/2 /10-13 mm Length of Handle: 35.5cm/14in Packing Size: 40*41*9cm/15.74*16.14*3.54in Adjustable Length: 61.3-81.6cm/24-32in Gross Weight: 10kg/22lbs Working Capacity: 4173kg/9 200 lbs Breaking Strength: 14968kg/33 000 lbs Package Included 2* Chain Binders Notes 1. Develop good lifting habits and plan how to hang lift and unload before the lifting work starts. 2. Make preparations: determine the weight and center of gravity of the object to be lifted and mark the lifting and weight data. Only after the center of gravity is determined can the hook be hung in the proper position. 3. The crane operator should be informed of the weight of the object to be lifted. 4. The crane hook should be hung vertically above the center of gravity of the object to be lifted. 5. The lifting object is to be lifted in such a way as to avoid damage to the lifting object damage to the rigging itself rotation or dropping. The following conditions need to be observed to ensure safe lifting. 5.1 For single-leg rigging the lifting point should be vertically above the center of gravity of the object being lifted. 5.2 In the case of double-legged rigging the lifting point should be located on both sides of the lifting object with the lifting point above the center of gravity. 5.3 In the case of three-legged and four-legged rigging the lifting point should be evenly located at the level of the center of gravity of the lifted object and above the center of gravity of the object to be lifted. 6. This product is not designed or approved for high-altitude hoisting but only for binding and tightening 7. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.