2 Channel Isolated CAN Bus Expansion Board Built-in Protection Circuit Support CAN2.0 CAN FD Dual Channel 8Mbps for Rasp

Raspberry Pi Mainboard is not includedOverview:Special Designed Dual Channel Isolated CAN Bus Expansion Board for Raspberry Pi with Great Anti-interference Performance and Better Transmission RateSupport CAN2.0 and CAN FD.Transmission Speed up to 8Mbps.Larger Data Transmission CapabilityMultiples of Built-in Protection Circuit included Thunderstrike Protection ,Electrostatic Protection,Shortcut Protection, Electrical Isolation and so on.Stability and Security Under Industry StandardFeatures:1.Based on Raspberry Pi 40pin GPIO Interface, compatible with Most Raspberry Pi series Mainboard2.Support CAN2.0 as well as CAN FD.High Transmission Speed Could Go Up To 8Mbps3.With SPI Controller Interface, Could Be Connected to STM32/ Controller Boards4.Electrical isolation Included. Isolation Voltage up to 5KV.Providing Better Stability and Anti-interference Performance5.Built-in Protection Circuits that make the project much safer6.Electrical Level Switch included, Could be Switched Between 3.3V/5V7.120 Terminal Resistance included.Specification:CAN controller : MCP2517FDCAN transceiver: MCP2562FDCommunication: SPI (default to be 2 channel SPI, could be changed to single channel by resoldering)Power: DC 8-26VWorking Voltage:5VElectrical Level:3.3V/5VSize: 65X56.5mmFor more info, Please click :http://www.waveshare.net/wiki/2-CH_CAN_FD_HATPS:This link is in Chinese, you may read it with Google TranslationPackage Included:2-Channel CAN FD HAT x 12x20PIN Connector x 1Screws kit x 1