2 Blades Professional Garden Fruit Tree Pruning Shear Grafting Cutting Tool, 501 Original

Features: Rootstock and scion it is easy to match the U-cut,V-cut or Ω-cut,rapid healing Using easily and fastly. Grafting method than the traditional savings The time and effort Blade can be replaced Use the pruner to cut useless branches from the plant Specification:For the knifeMaterials : carbon steel, ABS and AluminumColor blackCut grafting stocks from 5mm up to 1.4cm diameterTrimming blades 3mm thickPhillips screwdriver with red handleSize 27*10 cm/10.5*3.9inch(1cm=0.39Inches) A wrench2 additional bladesA black bag How to use: Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant. Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only. Step 3: Place sterlizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions. Step 4: Use the pruner to cut useless branches from the plant. Step 5: The grafting tool with \\\"V U Ω\\\" blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade. Note: Keep out of reach of children Do not use on dry or old hard woodPackage Content:1x Professional Nursery Grafting Tool Knife1x Phillips screwdriver1x wrench2x additional blades1x black bag with zipper