18W RGB LED Swimming Pool Light Underwater Waterproof Remote Control Wall Mounted Night Light

Specification: Power: 18W LED Chips Type: SMD2835 Beam Angle: 120 deg Power rating: AC12V Frequency: 50~60Hz Waterproof: IP68 Installation Location: 0.6M below water level Cable Length: 135cm Remote Control: Within the scope of 50m Features: 252Pcs 2835 lamp beads LEDs with super bright and crisp colors. Can be switched on and adjusted by a remote RGB controller for convenience. Plastic housing makes it acid-proof and alkali-proof. Supports 15 different kinds of color styles. The lamp is filled with resin inside, which makes it 100% waterproof Easy to install, fitting to standard pool fittings. Compatible for both fresh or salt water pool Remote Control Operation: ON/OFF: Power switch function,press the key for turning on or turning off the light. MODE: Modes selection,the light can be turned to the first program when press this key for 5 seconds at any working program. 15 pre-programmed color modes of RGB light. 1.R-G-B change gradually to full modes 2.RG:Static State Yellow 3:RB:Static State Purple 4.GB:Static Cyan-Blue 5.RGB-RG-G-GB-B-R animation 6.RB-GB-B animation 7.R-G animation 8.B-R animation 9.G-B animation 10.RB-B animation 11.G-GB animation 12.R:Static State Red 13.B:Static State Blue 14.G:Static State Green 15.RGB:Static State White B+/B-: Adjust the brightness of the light at any working program,there are total 10 adjusting levels. S+/S-: Adjust the color changing speed,there are total 10 adjusting levels Note: You will need a AC12V transformer to power the lights. If more than AC12V, it will damage the light. Package Included: 1 x LED Light 1 x Remote Control (1x Battery 23A/12V Not Inculude ) 1 x Waterproof Connector