12V Lithium Battery Pack Charging Discharging Integrated UPS Power Module High Power Charging

Supported functions: Charge control Lithium battery protection Boost protection SW switch (hard control) Various protections such as overvoltage and overcurrent short circuit Balance charge UPS two-way seamless switching type charging and discharging Unsupported functions: Power input reverse connection protection Output enable control (soft control signal trigger output) Output intelligent control (timing delay cycle on and off etc.) Parameter: Input power voltage: 12V / 9V Long-term load capacity: 12W Battery: double-cell series Default charging current: 900mA-1A Charging indicator: Yes Output indicator: Yes Note: 1. Install the battery according to B + B- marked on the module. 7.2V battery pack is not applicable. 2. Reserve 1A for the selected power supply (requires 1A for charging while the power supply is loaded) such as 12V1A load please use 12V2A for power supply. 3. Because there are many types of protection functions when the test encounters no output please try to re-activate the output after connecting the power. 4. The power should not be reversed. 5. When soldering a soldering iron need to ground it. Colour:black Material: PCB Package Contents: 1 x battery UPS power module Only the above package content other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.