12V 24V 18 Channels High Power Wireless Remote Control Switch Board with Shell with Remote Controller

Specification Product name DC12V 24VIB road remote control switchWorking voltage DC12V 24V optional Working frequency 315MHZ 433MHZ optional Working mode Jog M4 self locking T4 interlocking L4 jogging and self locking coexistCode pairing method intelligent learning typeWorking environment 40 80 degreesReceiving sensitivity ≥105dBmOutput current inductive≤3 5A resistive≤6ADimensions 120 x 73 x 19mm without shell 125 x 78 x 3mm with shell Product name 1000m 18 key remote controllerWorking voltage DC12V 12V 23A Working frequency 315MHZ 433MHZ optional Chip model 1527 or 2264Encoding type millions of codes or pad type into a passwordOscillation resistance 4 7 default Modulation method ASK stable and less interference Remote control distance 1000 meters open Dimensions 131 7 x 53 x 15 3mmNote The receiver is powered by 12V or 24V and the default is 18 independent relay signal output that is without voltage output The output terminals have normally open normally closed and common terminals all without voltage This switch can generally be applied to the following two occasions 1 With 12V or 24V voltage output this kind of equipment only needs to draw a positive wire from the input end to the common end and then share the negative wire of the input to directly control the 12V or 24 device 2 Directly connect the normally open end and common end of the output end to other voltage circuits to control its on and off The recommended control