12V 18650 Battery Storage Spot Welding Module DIY PCB Circuit Board Welders, 501 Original

12V 18650 Battery Storage Spot Welding Module Portable DIY Lithium Lion PCB Circuit Board Welders Equipment Description:This circuit with 12V battery will become a storage spot welder for welding lithium batteries, nickel-chromium batteries and other nickel sheets. According to different configurations, the welding thickness can be about 0.1mm-0.15mm. and a thickness of 0.2 mm can be replaced by a thicker the wires (10 square feet) are soldered. After all, this device is aimed at electronics enthusiasts and the frequency of use is not very high, so you can also use 0.1-0.15mm solder 0.2mm instead of thicker nickel.Feature:Battery Storage Spot Welding PCB Circuit Board.7-16.8V power supply.Support manual/automatic mode.Multiple options.Light indication.Support for Fara capacitor airplane model high-rate battery.Specification:Power supply range: 12V (car battery or high-rate battery with capacity greater than 5000mAh and 35C, capacity X rate = must be greater than 150A, the power supply is not enough, there is a risk of bombing, do not try to use DC power to weld, not industrial-grade power current Can\\'t reach it at all)Power Supply Current: Not Less Than 150APower Supply Voltage: 12V-16.8V (capacity X rate = must be greater than 150A)Current Requirements: Instantaneous output of 150A or higher (for example, car starter power, 3S RC high-power battery pack, 20A lead-acid battery with a performance of more than 20A)Button Function: The button can switch modes. Each mode corresponds to a different welding time. LED corresponds to 7 modes of red/green/blue/white/yellow/powder/purple, the shortest red time and the largest purple welding time. Long press to set the waiting time, the default is 3 seconds, the maximum can be set to 10 seconds.Board Size: 80 X 36mm/3.15 X 1.42\\\"Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-3mm measuring deviation due to manual measurement.