10pcs Arc Air Electrode Gouging Carbon 4-12mm Dia Rods Carbones Copperclad 355mm

Features: brand new high quality Made of high-quality materials for durability Contains a precisely formulated blend of carbon and graphite General Purpose Copper Clad Tip Gouging Electrodes Controlled copper coating for improved conductivity (for more efficient cooler operation) Air carbon gouging electrodes are designed for cutting and gouging metals such as carbon steel stainless steel copper aluminum and some superalloys. Applications for these gouging electrodes include manufacturing maintenance farms and repair shops Creates an arc melts the metal and uses compressed air to blow the molten metal out of the groove Typical chemical composition 80% graphite and 20% copper The current type is DC and the working polarity is the positive and negative polarity of the DC electrodes The copper coating increases electrical conductivity providing more efficient and cooler operation. Air carbon arc gouging is the process of creating an electric arc between the tip of the carbon electrode and the workpiece. The metal melts and a jet of high-velocity air flows down the electrode blowing it away leaving a clean groove. The process is simple to apply (using the same equipment as MMA welding) has a high metal removal rate and allows tight control of the overcut profile. The electrodes are graphite (carbon) rods with a copper coating to reduce electrode corrosion. The electrode diameter is selected according to the required planing depth and width. Cutting can be precisely controlled and molten metal/slag is kept to a minimum. Since air carbon arc gouging does not rely on oxidation it can be applied to a variety of metals. DC (positive electrode) usually works on steel and stainless steel but AC is more effective on cast iron copper and nickel alloys. Typical applications include back gouging removal of surface and internal defects removal of excess weld metal and preparation of weld bevels. Gouging torches are usually operated using a compressed air line or a separate bottled gas supply. Air supply pressure on the air line will be up to 100psi but bottled supply air pressure is limited to around 35psi. There is no advantage to using higher pressures and flow rates if there is enough airflow to remove molten metal. Product parameters: Material: Copper plated carbon rod Diameter: 4-12mm Length: 355mm Capacity: 300 - 400 Amps DC (Direct Current) Optional size: 4mmx355mm 5mmx355mm 6mmx355mm 7mmx355mm 8mmx355mm 10mmx355mm 12mmx355mm Package Included: 10 * Gouging Carbon Rods Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data.