10S 36V 35A PCB BMS Protection Board Li-Ion Lithium Battery

High-accuracy voltage detection circuit fine workmanship and durable. With Over-discharge protection overcurrent protection overcharge protection temperature control protection function safe and . The protection board is for 10 series cell - batteries it can be used for 3.7V ternary batteries manganese acid batteries and cobalt acid batteries. It has balance function which would each battery cell being fully at time. It is suitable for electric car electric assistant car skateboard car inverter etc. Continuous Discharge Current: 35A Momentary Discharge Current: 100A Charge Voltage: 42V Charge Current: 8A(Max.) Overcharge Protection Overcharge Detection Voltage: 4.28±0.05V Overcharge Protection Delay: 100mS Overcharge Cancel Voltage: 4.08±0.05V Over-discharge Protection Over-discharge Detection Voltage: 2.55±0.08V Over-discharge Detection Delay: 50mS Over-discharge Cancel Voltage: 3.0±0.1V Overcurrent Protection Overcurrent Detection Voltage: 150mV Overcurrent Detection Delay: 15mS Overcurrent Protection Current: 120±5A Protection Cancel Condition: Disconnect Load Short Circuit Protection Short Circuit Protection Condition: Outside Load Short Circuit Short Circuit Detection Delay: 200uS Protection Cancel Condition: Disconnect Load Internal Resistance Main Circuit Conduction Internal Resistance: less than 15mohm Consumption Working Current: less than 50uA Sleeping Current(Battery Over-discharge): less than 10uA Operating Temperature: -30Celsius-+80Celsius Weight: 52g Colour:silver Material:PCB Size:16.51 x 10.39 x 1.60 cm Package Contents: 1x 10S 35A lithium Battery Protection Board Only the above package content other products are not included. Note: Light and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.