10PCS Carbon Steel Welding Flux-Cored Rods Welding Wire Electrode Super Melt Flux-Cored Welding Rods No Need Solder Powder

Bullet points: 1. Wide range of applications-suitable for welding or surfacing welding of alloys with high strength good forge ability and corrosion resistance. 2. High-quality materials-made of carbon steel materials non-toxic tasteless and durable. 3. No solder powder-no need to use other flux powders with aluminum alloy as flux and coating as a base. 4. Application-including welding filler wire and spraying and flame metallization welding wire. It is also used for argon arc welding and filling materials of pure aluminum connection with aluminum bus bars and guide rods of aluminum electrolysis plants as well as electricity chemistry food etc. 5. Perfect welding effect-because the product has internal powder excellent weldability and corrosion resistance high thermal conductivity high electrical conductivity and excellent processing performance it has a sufficient and smooth welding effect. Instructions: 1. Clean and polish the physical surface. 2. Heat the surface of the metal material until the temperature of the wire reaches the working temperature of 420°. 3. When repairing thin aluminum heat the aluminum-based metal to an appropriate working temperature and then use welding wire to rub and melt to form a weld. 4. Use propane gas to weld small objects use industrial gas or induction heating device to heat and weld large objects and cool down naturally after welding. Descriptions: Material: Carbon Steel Color: Silver Working temperature: 420° Diameter: 2mm 1.6mm Length: 500mm 33cm Wide range of applications: Widely used for welding aluminum manganese alloy aluminum alloy scooters shipbuilding etc. Package included: 10*Carbon Steel Welding Rod Notes: 1. The thicker the piece the more difficult it is to heat up so it is important to use enough heat sources. 2. As long as the surface temperature of the base metal reaches the working temperature of the welding wire welding can be started. 3. When using oxyacetylene for welding a neutral welding flame should be used but do not burn the welding wire directly. 4. Applicable heat source: such as propane oxygenated fuel etc. 5. Storage: Please store in a dry and ventilated place.