1080P Wireless Remote Control Module Board Mini Camera DV DVR Recorder

Description : 1080P Wireless Remote Control Module Board Mini Camera DV DVR Recorder with Microphone Hidden HD Camcorder Features : Mini camera uses 2.4G wireless remote control, remote control distance of up to 20 meters, including the curve reflects the simple, responsive. Using high-capacity battery, continuous recording up to 5 hours of recording time without the human body sensor. Use CCD lenses to ensure high-resolution, low light. It is only used for forensic purposes of public security, court reporters, lawyers, etc. Prohibited for illegal videotaping, such as for illegal videotaping constitutes a crime, our Company is out of responsibility. Specification : Video format: AVI Video encoding: M-JPEG Video resolution: 1280 x 960 Photo:1280 x 1024 Video frame rate: 30fps Picture format: JPG Image ratio: 4:3 Playback software: Operating system or Mainstream audio and video playback software Support System: Windows 2000/XP/2003/Vista; Macos; Linux Working time: About 25 hours Charging voltage: DC-5V Battery Type: High capacity polymer lithium battery 3000mah Interface type: Mini 8Pin USB Storage: TF card Operating Instructions : 1. Starting up: slide the switch on the machine to ON, press the A button on the remote control, red keep bright enters the standby state 2. Take photo: In standby mode, short press the B button, and red lights flashing once, it means take a picture and save it. 3. Take video: In standby mode, short press the C key, red light flashing three times then off, then starting to take video, then press the C button, the red bright, stop recording and save. 4. Body sensor camera: In standby mode, short press the D button, the red and blue light flash three times then enter the motion detection status. When detect a moving picture object, blue lights flash again, then start recording. 5. Shutdown: In standby mode, press the A button, blue light flashes three times, shut down. (slide switch to the off, cut off all power) 6. USB connected to the computer: open the removable disk can read the file, USB connected to the computer 7. Charging : USB connected to the computer ro charging ,Or you can connect the charger, the red light flashes when charging, fully charged red keep bright.. 8. Time modify setting: Please insert the TF card to the machine, connect the computer, open the "Time" document in the removable hard disk, then change the time to current time, then save the "Time" file. After saving the file and exit security hardware, restart the machine, time setting is completed. And now video file time of watermark is set at the same time with you. Package includeds : 1 x Module Camera 1 x USB Cable 1 x Remote Control 1 x User Manual Details pictures :