10.1 Inch Capacitive HDMI LCD IPS Touch Screen 1280x800 With Acrylic Stander For Raspberry Pi Banana Pi BB Black (Adaptor: US)

10.1 Inch Capacitive HDMI LCD IPS Touch Screen 1280x800 With Acrylic Stander For Raspberry Pi Banana Pi BB BlackFeature:LCD and Main Board- IPS Screen with the resolution of 1280 × 800.- Capacitive LCD, supports 10 point touch.- Supports Raspbian, Ubuntu, Windows 10 IoT. No drive with single touch.- Supports BB Black, provide Angstrom and related mirroring.- HDMI interface is used for display while USB interface is used for touch.- Supports Backlight ControlAcrylic Stander- Adopts the high-quality meterials of black acrylic.- Slope: 30°or 45°- Reserved mounting holes for external board. Supports Raspberry Pi 3B/ 2B/ B+/ A+/ B, BB Black AND Banana PiPacking included:1 x 10.1 Inch LCD1 x Acrylic Stander1 x Installed Screw1 x HDMI Cable (Cable Length: About 40cm)1 x USB Cable (Cable Length: About 45cm)1 x Power Adapter (EU Plug 5V 2.5A, Cable Length: 90cm or US Plug 5V 2.5A, Cable Length: 90cm)FAQ:Q1: How to use the LCD on Raspberry Pi?A1:* Download the newest version mirroring(raspbian, ubuntu)* Burn the mirroring to TF card, open the config.txt file in the catalog.* Revise the config.txt file, then add the code at the end of the file as following:max_usb_current=1hdmi_group=2hdmi_mode=1hdmi_mode=87hdmi_cvt 1280 800 60 6 0 0 0* Insert the TF card into Raspberry Pi and power.Q2: How to do if the LCD can not work when connect with PC?A2:* Ensure the normal function of HDMI interface on PC* Ensure the PC only connect with LCD as display device* Connect the power cable at first then to the HDMI cable.* Some PC needs to reboot.(Attention: The PC must be windows system)Q3: What' s the operating current of 10.1 inch HDMI LCD(B)?A3: Powered by 5V. It' s around 750mA about the on backlight, 300mA about the off backlight.