1.7 kW 2.3HP 52CC Gas Power Backpack Sweeper Driveway Snow Lawn Broom Brush Cleaner

Key Features： Professional Cleaning Ability: Thanks to the robust nylon brush head the sweeper machine not only can remove dirt and leaves but also reliably clears snow and grit from driveways and sidewalks in winter. High-efficiency: with its powerful (1.7kw/2.3hp) two-stroke petrol engine and a speed of up to 200 RPM this sweeper machine can sweep a large area in a short time. Time and Effort Saving: This sweeper machine is about six times faster than by hand. With its rolling brush head you sweep effortlessly making it a pleasant experience. Wide Cleaning Area: This sweeper machine has a large brush head of 52cm/20.4in allowing you to clean wide areas at the same time compared to a normal broom. Large Capacity Fuel Tank: 1L/0.26gal large capacity fuel tank is very convenient for you to use for a long time and avoid frequent refueling. Application： It can be used to sweep boulevards driveways lawns pavements golf courses football pitches tennis courts and other areas with artificial grass. Specification： Color: Red and Black Brush Material: Nylon Brush Head Type: Rolling Bar Brush Assembly Required: Yes Starting Method: Hand Pull Start Carrying Style: Backpack Drive Type: Petrol-powered Automatic Clutch Engine Type: 2-stroke Gasoline Engine Air-cooled Engine Power: 1.7 kW / 2.3 hp Brush Head Rotation Speed: 200rmp Displacement: 52 cc Fuel: Gasoline-oil Mixture (25: 1) Tank Capacity: 1L/0.26gal Nylon Brush Head Width: 52cm/20.4in Brush Head Diameter: 23cm/9in Total Length: 180cm/70.87in Curved Baffle Size: 60*35cm/23.62*13.7in Backpack Section Height: 40cm/15.75in Packing Size: 78*49*37cm/30.7*19.29*14.56in Gross Weight: 18.5kg/40.78lbs Net Weight: 18kg/23.68lbs Package Included： 1x Mainframe 1x Operating Lever 1x Drive Rod 1x Drive Flex Shaft 1x Carry Handle (Aluminum Tube Stabilizer) 1x Tool Kit 1x Proportioning Pot 1x Funnel 1x Goggles 1x English Instruction Manual Notes： Clean the air filter sponge once at 20 working hours. Open the hood after 50 working hours to remove dust from the cylinders and other parts of the engine. Remove the spark plugs and clean out the carbon deposits at 200 working hours and replace them if necessary. Empty the carburetor pump bubble of fuel when not in use for a long time. Open the connection plate after 200 hours of operation and check the clutch for wear and tear and determine whether it needs to be replaced according to the operating conditions. Fill the grease once at 50 working hours. Check if the screws are loose in all parts of the drive shaft. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement and make sure you do not mind before ordering.on: