0-25.4mm Meter Digital Dial Indicator Electronic Digital Display Dial Indicator

Press the key more accurate more durable waterproof and dustproof. Zero adjustment at any position for easy measurement of small differences. On / Off button; and can choose to automatically shut down. Metric/imperial systems are interchanged at any location. There are two types of data output interfaces: normal or mini usb interfaces. usage: 1. Clean the contact points and the spindle with a soft cloth before use. 2. Press the switch to turn on the and observe if the display is normal. 3. Contact the contact point with the workpiece and compress it to approximately 0.15 mm then press the zero key to zero. The indicator can now be measured. 4. When you need a different TV show press the mmlin switch to select 5. Data preset: Press and hold the zero point setting (SET) for 2-3 seconds to enter the preset data state. How to replace the battery: 1. Remove the battery cover and replace a CR2032 battery with the positive () side facing up. Avoid impact impact drop etc. otherwise it will affect the appearance and precision. 2. Prevent liquid from entering the interior. 3. If the output interface is not used do not remove the output connector cover. The output cannot be connected to metal. Doing so may damage the indicator. 4. Do not connect the part of the digital indicator to the voltage; otherwise the circuit will be damaged. 5. If you do not use it for a long time you must remove the battery. Waterproof and dustproof rating: IP54. Measuring range: 0-25.4mm Colour: yellow + silver Material: stainless steel + high quality copper Package Contents: 1 * Digital display dial indicator Only the above package content other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.