Universal 24VDC Board For Automatic Double Arms Swing Gate Opener Control Board Panel Smart Control Center System -------- Easy to Install

Designed for 2 motor controls (electromechanical or hydraulic) it allows programming different offset times on opening and closing buffer stops on every move and obstacle detection. It contains the control input indicator The device supports additional radio card receiver models. The operating procedure uses START for automatic operation. STOP PED SWITCH if required use the radio buttons the operation is done in any of the following cases: by activating the corresponding process end or due to working hours. Activating STOP will immediately stop operation and require a new instruction to start over. Activation of the safety contact during the closing operation will result in reverse operation the contact for activating the opening operation of the garage light activates 0.5 seconds before starting the opening operation and deactivates 3 minutes after activation. To regulate the engine power selected in the power regulator is applied after 2 seconds after starting the maneuver. Pause time (selected in the work time plan) is the time pattern that the engine will operate in pause state before the maneuver is completed.