Rccskj Powerbox Power Board Pro Series 4106 Termurah 100 % Original
Description
READY STOCK
*HARGA LEBIH MAHAL TAPI ASLI 100% ORIGINAL
*Jangan tergiur harga murah Features:
Black Power Board (4106)
Dual battery redundancy for safer flying
LCD display which shows real time info of your in and out voltages
Built in regulator that supplies a clean 5v to your receiver
Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
8 channels in, 16 channels out (+ ignition)
Electronically isolated for interference free flying
Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
Ability to use High voltage servos while providing a clean 5v to your RX
Battery balancing (draws extremely evenly from your dual battery set up)
Short Circuit protection (in the unlikely event of a short it will protect from battery drain)
**Please note the input voltage for this unit MUST be between 7v-13v. Our 4S LiFe batteries would be ideal for this unit, providing selectable voltage from 4.8v to 10.9v to the servos. If using 3S LiFe (9.9v), the approximate adjustable voltage to servos would be 4.8v-7.6v and 3S LiPo (11.1v) will provide approximate selectable voltage 4.8v-9.7v to the servos.
Specs:
Black Power Board (4106)
Input Voltage: 6-13v
Working load: 0A to 30A
Weight: 4.5 oz.
Dimensions: 4.5"x2.5"x5/8"
Working Temperature: -20c to -85c
Recommended Set ups: Use the Black Power Board for 50cc to 100cc or bigger. *Setelah menerima paket , jika produk memiliki masalah, silakan hubungi kami terlebih dahulu. Jangan tinggalkan komentar negatif, kami akan menyelesaikan masalah dan bertanggung jawab100%. Terima kasih!
*HARGA LEBIH MAHAL TAPI ASLI 100% ORIGINAL
*Jangan tergiur harga murah Features:
Black Power Board (4106)
Dual battery redundancy for safer flying
LCD display which shows real time info of your in and out voltages
Built in regulator that supplies a clean 5v to your receiver
Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
8 channels in, 16 channels out (+ ignition)
Electronically isolated for interference free flying
Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
Ability to use High voltage servos while providing a clean 5v to your RX
Battery balancing (draws extremely evenly from your dual battery set up)
Short Circuit protection (in the unlikely event of a short it will protect from battery drain)
**Please note the input voltage for this unit MUST be between 7v-13v. Our 4S LiFe batteries would be ideal for this unit, providing selectable voltage from 4.8v to 10.9v to the servos. If using 3S LiFe (9.9v), the approximate adjustable voltage to servos would be 4.8v-7.6v and 3S LiPo (11.1v) will provide approximate selectable voltage 4.8v-9.7v to the servos.
Specs:
Black Power Board (4106)
Input Voltage: 6-13v
Working load: 0A to 30A
Weight: 4.5 oz.
Dimensions: 4.5"x2.5"x5/8"
Working Temperature: -20c to -85c
Recommended Set ups: Use the Black Power Board for 50cc to 100cc or bigger. *Setelah menerima paket , jika produk memiliki masalah, silakan hubungi kami terlebih dahulu. Jangan tinggalkan komentar negatif, kami akan menyelesaikan masalah dan bertanggung jawab100%. Terima kasih!
Price history chart & currency exchange rate