RANMEI Steel Copper Aluminum Soldering Tool Weld Flux Welding Rods Cored Wire

Product Description: Copper-aluminum-stainless steel welding wire seam repair in Wuxi 1. Good welding effect: its welding effect is full and smooth! With the help of internal powder. It has a low melting point good fluidity hardness and toughness and good sealing. No need to use other flux powder 2. Direct use: any flux is really needed open the package for use! very convenient! Easy to solder. 3. Welding: first use sandpaper to polish the brass and aluminum pipe welding parts (the paint oxide oil etc. on the metal surface must be cleaned) move the welding torch to evenly heat the welded parts and then continue to use the welding rod to be welded when the temperature rises to At 360 degrees the copper-aluminum electrode melts and evenly enters the joint. After the weld is full remove the cutting torch and wait for it to cool. No further treatment is required after cooling the flux residue is visible but non-corrosive non-hygroscopic and firmly attached. Product Parameters: Diameter: 1.6mm/2mm Commodity name: Copper and aluminum flux cored wire Quantity: 1 Length: 300mm/500mm Applies to: 1. Welding of copper and aluminum foil for aluminum and copper joints 2. Welding of aluminum tube and brass of condenser/evaporator of refrigerator and air conditioner 3. Welding of copper and aluminum wires for radiators motors batteries household appliances and other products Package list: 1 * Welding Rod Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data.