MPPT Solar Controller Solar Charge Controller Over Temperature Protection For Battery WS-M100-13.8V

MPPT Solar Controller Solar Charge Controller Over Temperature Protection for Battery WS-M100-13.8V Specification: Item Type: MPPT Solar Controller Output Power: 100W Efficiency: Greater than or equal to 95% Protection Class: IP67 Material: Flame Retardant plastic shell Product Size: Approx. 63 x 32 x 18mm / 2.48 x 1.26 x 0.71in Noise: 15.5V >16.5V Charging module PV input starting voltage >17V PV input tracking voltage 15-25V 15-25V 16-25V Output to battery voltage 13.8V 12.6V 14.6V Output to battery current 8A No Load loss 20MA Voltage regulation 1% Load Regulation 5% Full load ripple 400mV No load ripple 100mV Discharging module Static power 12mA Protection module Battery terminal short circuit protection Yes Load short circuit protection Yes Temperature protection Yes Operating temperature -40 degrees Celsius ~+65 degrees Celsius Application Areas: Solar street light controller solar power charger solar electric bike solar electric tricycle solar toy car PROTECTION FUNCTION: OVERHEATING PROTECTION: When the internal temperature of the MPPT controller exceeds 100 degrees Celsius the MPPT controller will reduce the output power. If the internal temperature continues to rise to 110 degrees Celsius the MPPT controller will automatically turn off the output. When the internal temperature of the MPPT controller is lower than 90 degrees Celsius the MPPT controller will automatically resume operation. SHORT CIRCUIT PROTECTION: When an unexpected short circuit occurs in the MPPT controller output the MPPT controller automatically turns off the output and automatically returns to normal after the short circuit removed. INPUT UNDERVOLTAGE PROTECTION: When the input DC voltage of the MPPT controller is lower than 15V the MPPT will protectively shut down and automatically resumes operation after the input voltage is normal. PREINSTALLATION INSPECTION: 1. Check the appearance is normal before installation. 2. Check the label on the MPPT controller enclosure to verify that the specifications and performance of the MPTT controller match the equipment. Package List: 1 x MPPT Solar Controller Note: 1. The MPPT controller should be fixed on an iron or metal bracket to avoid the machine shaking due to instability. 2. The MPPT controller should be installed with some space around the enclosure. 3. Output and input wires should be as short as possible to avoid excessive energy consumption during transmission. 4. There is high voltage and high current in the machine non professionals cannot use it and allow to disassemble it. 5. Input and output terminals should be reliable and not loose to avoid heating at the connection point.