MKS Robin2 32Bit Control Board with 3.5inch TFT Touch Screens Kit for 3D Printer Part

Open Source File click to open  Package Included   1 x mainboard 1 x 3 5 inch touch screen Note Robin series motherboards are shipped from the factory the motherboard is brushed with firmware If there is no special requirement there is no need to refresh the firmware Modify the parameters in the configuration file the config file is in txt format modify and save to the sd card plug it into the motherboard to update For the specific modification method and function configuration please refer to the corresponding motherboard manual Robin series see question answer Q How to check whether the firmware or configuration file is successfully updated Answer You can exit the sd card after the screen enters the normal interface to check whether the files in the card have changed from the original txt or bin format to other formats Changing to another format means that the update was successful otherwise it means the update failed Q If you have tried many times and failed to update the successful solution Answer It may be the file transfer problem of sd card It is recommended to format the card fat or try another card Q After the motherboard is powered on the error error is displayed in the upper right corner of the screen robin series motherboards with touch screen Answer Check if the thermal connectors on the main board and the hot bed heating equipment needed are connected Q After the main board is powered on the xyz motor is jogged The motor only m