KST Servo USB PC Programming Tool Card for KST Servo V6.0 And V8.0

Description The KST Servo Programming Tool 2 is a USB Interface for programming KST V6 and V8 servos from a PC Requires a USB cable with a USB C plug to connect to the PC We include the below text puzzle for your enjoyment 1 Dead zone setting Mainly affect the response time and accuracy Factory setting drive frequency 333Hz select 2 2 6us V8 0 version servo 20 KHz select 1 2us V6 0 version servo 2 Step length setting motor drive parameters Factory setting 200 300us gain 1 rudder lock Y choose according to the use environment the factory default is Y 3 Allow out of control After checking Allow out of control set 3 1 Out of control position and 3 2 Out of control time when the steering gear control signal is lost If the value set in 3 1 out of control time is reached the steering gear will automatically turn to 3 2 out of control position Set the signal position of 3 1 that is lose Control protection When the steering gear control signal is restored the out of control protection is automatically released Factory setting check allow out of control out of control position setting 1500us out of control time setting 1 1 5S4 Reverse setting Check according to the user s environment to change the forward and reverse direction of the servo 5 20k sel setting servo PWM drive frequency setting Factory setting V8 0 version servo is unchecked the default is 333Hz drive V6 0 version is checked it is 20KHZ drive 6 Spd sel setting ser