JahyShow 2PCS Garage Door Opener Remotes - Compatible with Linear Multicode 300mhz 10 Dip 3089 3060 3070 Opener

Remote control 300MHZ with 10-bit dip switch. SIZE:2.08*1.53*0.51 Note: The battery has been installed inside the remote control! ! ! COMPATIBLE REMOTES: Multi-Code: 1089 3060 3060-01 3070-01 3083 3083-01 3089 3089-11 4120 4120-01 4140 & 4140-01 Linear: MCS308911 MCS412001 MCS414001 MCS306001 MCS307001 MCS308301 and MCS420001 Digi Code: 5010 5030 5040 5060 and 5070 Eagle: EG 140 EG 144 EG 148 AND EG 152 Specifications: Decoder IC- rolling code. Frequency -300MHz. 10 inclination switch Working voltage: 3V DC CR2032 (including battery) Launch distance: 25-50m in open space. Open space means no interference. There are no walls no doors no trees or any other obstacles. Interference such as garage doors or brick walls will significantly reduce the remote control range. Coding: Access to the remote s toggle code switch i s achieved by unscrewing the back cover. Set the TEN-digit toggle code switch to match the code set in the receiver. Move switches using a small pointed object such as a paper clip. Gently switch the small switches to either + or - positions. When complete screw the back cover back into position OPERATION: Once the codes are set to match the transmitter codes you may test the system. Ensure the gate or door is visible and clear before testing. Step 1- Push the Remote s button from a distance of about ten feet. If the receiver activates the switches are properly set. Step 2- Test the transmitter from several locations to discover any blind spots caused by interference. Battery Access: Unscrew the back cover to reach battery compartment. Be aware of battery polarity when replacing the A23 battery. The package contains: 2* garage door remote control