JVCC SCF-01 Low-Density PVC Foam Tape: 3/4 in. thick x 1-1/2 in x 15 ft. (Black)

JVCC SCF-01 Single-Sided Foam Tape is a low density closed-cell PVC foam tape in thicknesses of 1/16 1/8 3/16 1/4 3/8 1/2 or 3/4 inches. It is an economical general-purpose foam tape coated on one side with a high-performance acrylic adhesive. The adhesive on this single-sided foam product is on the exposed side of the tape when you unwind it from the roll; the release liner is pulled away from the non-adhesive side of the tape. A good combination of flexibility and conformability with strength & wear resistance. Also has excellent weatherability and chemical resistance. Used in applications requiring positive seals on irregular surfaces or when flexibility and conformability to seal tight radius curves are critical considerations. JVCC SCF-01 Foam Tape is used extensively in the automotive HVAC and construction industries to provide air & weather-tight seals; for gasketing cushioning vibration control in speakers vehicles electronic components and door frames. Also for filling and sealing gaps around windows doors and car/SUV tops for better insulation. It is a clean waste-free substitute for liquid sealants. Please make note that this a closed-cell foam product (to compress it 25% it requires 3.0 psi for the 1/16 inch thick up to 4.0 psi for the 3/4 inch thick); it is not soft like an open-cell foam product would be. It also complies with European RoHS directive 2002/95/BC. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product s actual size is 3/4 in. thick foam x 36mm x 15 ft. As with any adhesive tape product it is always the user s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter - Backing/Carrier: low density closed cell PVC foam - Adhesive: acrylic - Release Liner: white siliconized paper - Standards Met: European RoHS directive 2002/95/BC - Service/Operating Temperature: -4F to 176F - Density (dependent on thickness): 6 to 10 pounds per cubic foot - Tensile strength: minimum 15 psi - Force to compress 25%: 3.0 psi for 1/16 thick up to 4.0 psi for 3/4 thick - Compression deflection (dependent on thickness): 1.0 to 2.5 psi