Fun Craft Soap Making Kit

Follow these Instructions-Place the soap base into a microwave-safe container after making small pieces of the slabs. Kindly cover the lid or a plastic wrap, this would reduce the vapour loss & hence help in retaining the transparency of the soaps If you don't have a microwave, the double boiler will also do.Heat it in the microwave for about 40 seconds depends on the quantity of the base. You can increase/decrease the time, depending on the slabs taken. Make sure you do not overheat to boiling temperature.Remove the melted base from the microwave & gently stir well stirrer, make sure that no chunks of the base are present in the container. Do not stir too hard as it may create excess air bubbles.Add Soapy liquid colours to the base. The quantity of the colour to be added depends on your preference. However, to maintain transparency don't add more colours only a few drops is sufficient.Now you can add Fragrance Aroma oils to the base & stir. The quantity to be added should be 2 % to 3 % of the base being used. Don't add the fragrances when the base is too hot, to avoid evaporation of the fragrance. Natural products, powders, natural butters, dried powders can also be added. Stir the soap base so as to mix colours, fragrances etc then pour the base slowly into the mould.Spray the top of the mould with BDC Rubbing agent to remove any air bubbles.Allow it to dry for about 25 to 30 minutes depends on the size of the mould.When the soap is fully hardened, simply press the mould over and pop it out.NOW YOUR EXCLUSIVE HANDMADE ORGANIC BEAUTIFUL SOAP IS READY TO USE All through the process, make sure that there is minimum vapour loss.