For MACH 3 Edge Finder 3D Probe Used for Cnc Milling Machine Photoelectric Sub-Center Rod

The signal processing response time of the edge finder is fixed at about 0.0005±0.0001s various grades of numerical control and A circuits the delay consistency difference is relatively . When the probe approaches the measured surface reduce the axis movement speed as much as possible. In order to reduce the error caused by the delay consistency problem. Outer diameter of edge finder|mm|39 Clamping diameter|mm |6| Clamping length|m|Less than 20 Repeatability|mm|0.01 XY |mm |3 Exceeding the stroke will cause damage 2 pairs|mm |1.5 Exceeding the stroke will cause damage Battery||Lithium battery online automatic charging Work offline||Can be used as a photoelectric splitter Online work||Cocoa with the system for automatic centering Connection ||Distribution data cable|2m probe|mm|p1 tungsten steel Probe|mm|Competing for 1.5 Ruby Waterproof rating||IP43 can not work in the environment of coolant spraying Working voltage|V|6-30 overpressure out low voltage can t work Colour: Black material: metal Package Contents: 1 x Edge Finder Probe 1 x wrench 1 x cable Only the above package content other products are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.