Eachine Tyro79 Pro DIY 140mm F4 AIO 35A ESC 4S 3 Inch FPV Racing Drone PNP w/ 5.8G 400mW VTX Runcam Nano 2 FPV Camera

Уведомление:1.The Gyro is BMI270, which is not compatible very well with the latest firmare. So do not flash and keep the Default firmware out from factory.2. There is RC and R2 pad on flight controller board. Pls do notice and solder carefully ( Click the Диаграмма Изображение Link and refer to it) Введение:Upgrade Tyro79 Into Tyro79 Pro version.1. Equipped with New Mini F4 FC AIO 35A ESC2. Adds 3D Printing Protective Covers for Motors3. Adds Fixing Base for Installing Receiver4. Equipped with Runcam Nano 2 FPV CameraСпецификация:Марка: EachineModel: Tyro79 ProItem Name: DIY 140mm F4 4S 3 Inch FPV Racing DroneВерсия: PNP Без ПриемникDimension: 126x126x52mmWeight: 161.5g ( without Lipo battery)140mm FrameWheel base: 140mmFrame armthickness: 3mmТолщина верхней пластины: 1 ммТолщина боковой пластины: 1 ммFrame kit material: 3K carbon fiber & CNC 6065 aluminium1607 2800KV MotorKV: 2800KVLipo cell: 2-4SWeight: 17.8g (includes wires)Output shaft length: 14mmMaximum pull: signal 630g (4S 3030 4-blade propeller)Maximum power: 350WConfigu-ration: 9N/12PMounting holes distance: 12*12mmMounting holes: φM2Bearing: NSKN52 Strong NdFeB MagnetMINI F4 AIO 35A ESC ( Диаграмма Изображение)Flight Controller:MCU: STM32F411 Экранное меню: AT7456E Гироскоп: BMI270 Черный ящик: НЕТBEC Output: 5V 2A, 9V 2A URATS: 2Firmware: Mini F411 AIOESC:Con. Current: 35A-BLHeli_SESC Telemetry: NORecommend Lipo: 2-4SMounting Hole: 20.5X20.5mm, M3Dimension: 41x37mmWeight: around 11.6g3040 3-Blade PropellerQuantit