Dolsrinksys Adjustable Micro Angle Gauge High Precision Angle V Block 0-60° for Milling Lathe with Wrench

- Size(L×W×H): Approx. 2.95×0.98×1.42 inch/75×25×36mm when the 0 marking on the aligns to the 0 marking on the main scale it means. - Adjustable 0 to 60 by locking the hex screw on the bottom. 1 x Adjustable Angle Gauge 1 x Hex 1 Loosen the screw pull the V-block to rotate along the on the base to find the target angle. - Simple operation and high-efficiency. the marking on the left of the “0” marking stands for “minute” value (just the same as the caliper) the “degree” “minute” value means the angle of A B measuring surface rotating clockwise 2 Use the same methods as the caliper to get the readings the distance between two markings on the main scale stands for 1° - scale is on moving block. - Squareness: 0.0002 - Hex is included The A measurement plane is to the reference plane and the B measurement plane is perpendicular to the reference plane. - Easy to use for drilling and setup applications. - HRC is 50-55 the “0” marking on the points the “degree” value ② When 0 marking on the is on the left side of the 0 marking on the main scale the marking on the right of the “0” marking stands for “minute” value (just the same as the caliper) the “degree” “minute” value means the angle of A B measuring surface rotating counterclockwise - Angle of V is 90° - Weight: 1.15lb. (0.52kg) - Angle accuracy: ±10 the “0” marking on the points the “degree” value - Material: Steel and the distance between two markings on the for 10′. ①When 0 marking on the is on the right side of the 0 marking on the main scale