CM921S 2.4G Satellite Receiver For CM921 Compatible DSM2 DSMX Spektrum JR Transmitter

Redcon CM921S 2 4G Satellite Receiver For CM921 Compatible DSM2 DSMX Spektrum JRDescription Brand Name RedconItem Name CM921S Satellite Receiver Band 2 4GHzFeatures Use dual channel wireless frequency hopping technologySupport preset full channel protectionCompatible with all the DSM2 DSMX receiver compatible with AR6210 CM921 AR9020 AR8000 AR12120Compatible with Spektrum and JR 2 4G transmitterBinding Procedure 1 Put the binding harness into connector location marked BIND Next apply power to the receiver Both receiver and Satellite LED s should illuminate 2 To set fail safe throttle and control surface positions minimum throttle and all control surfaces set to neutral is suggested Press and hold the bind button of transmitter LED will illuminate Turn on the transmitter 3 Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid All fail safes should be programmed correctly now 4 Remove binding harness from the BIND channel Restart the receiver by cycling it power off and turn on All channels should function properly now You may test fail safe by holding sticks in corner cycle transmitter on and off Surfaces and throttle should return to your preset fail safe positions General Notes Only one bind procedure is required on a new receiver Repetitive binding provides no extra security Always remember to remove the binding har